Mitel 3000 / BT Versatility

Connection: Proprietary intelli-CTi compatibility - Mitel 2000
Driver required: None
Firewall ports required: TCP: 4000
Firmware version required:
(for new installations)		 902 or later
Other requirements: A Broadband Module (hardware) is required
Directory download: Extensions

Architecture

The Mitel 3000 / BT Versatility is connected to the LAN and configured using a serial cable directly connected to the PBX motherboard. A Broadband module is needed to allow IP connectivity. Once this is installed it can be accessed over the LAN via a web browser to be configured.

Notes:

  • Firmware version v902 is required.
  • Only Digital and IP handsets can be controlled.
  • Deflect, blind transfer, conferencing, internal hold and pickup are not available.
  • Analog handsets are not supported.
  • The initial state of extensions at startup is unknown.
  • Calls to numbers in the system speed dial list causes the number to not be shown.